A Ring camera uses different LED patterns to show its current status. If you notice your Ring camera blinking blue, it may indicate that the camera is connecting to WiFi or completing a setup process. In some cases, the blue light may continue because of a network issue or setup problem. Follow these steps to troubleshoot the issue.

1. Check Your WiFi Connection

Start by checking your home WiFi connection. Make sure your router is working properly and other devices can connect to the network.

Move your Ring camera closer to the router if the WiFi signal is weak. A stronger signal can help complete the connection process.

2. Restart the Ring Camera

Restarting the device can resolve temporary connection problems.

Turn off the Ring camera if your model allows it. Wait for about 30 seconds then power it back on. Check whether the blue light stops blinking after the camera restarts.

3. Check Ring Camera WiFi Setup

Incorrect network information can prevent the camera from completing setup. Open the Ring app and check the WiFi settings.

During Ring camera wifi setup​ make sure you select the correct wireless network. Enter the correct WiFi password. Keep the camera close to your router during setup.

If your router recently changed its name or password then reconnect the camera to the updated network.

4. Restart Your Router

A temporary router problem can affect the camera connection.

Unplug your router from the power source. Wait for around 30 seconds. Plug it back in and allow the router to fully restart. Then check your Ring camera again.

5. Update the Ring Camera Firmware

Outdated software can sometimes cause connection problems. Open the Ring app and check whether a software update is available.

A Ring camera firmware update can improve device performance and resolve known software problems. Keep the camera connected to a stable WiFi network while the update is being completed.

6. Check the Ring App

Make sure you are using the latest version of the Ring app. Update the app through your device app store if an update is available.

Sign in again and check the camera status. You can also close and reopen the app to refresh the connection information.

7. Reset the Ring Camera

If the blue light continues after trying the previous steps then consider resetting the camera.

The reset process varies by Ring model. Check the instructions for your specific device before performing a reset. A factory reset may remove existing settings and require you to complete setup again.

Conclusion

A Ring camera blinking blue light can occur during setup or while the camera is trying to connect to WiFi. Checking your network, restarting the device, reviewing ring camera wifi setup​ and completing a Ring camera firmware update can help resolve the problem. If the issue continues then resetting the camera or checking model-specific support instructions may be necessary.

FAQs

Why is my Ring camera blinking blue?

The blue light can indicate that the camera is connecting or completing a setup process. Check the Ring app for the current device status.

Can weak WiFi cause a blinking blue light?

Yes. A weak or unstable WiFi connection can prevent the camera from completing its connection.

Should I reset my Ring camera?

Try basic troubleshooting first. If the problem continues, then a reset may help. Remember that resetting can remove saved settings.

How can I update Ring camera firmware?

Keep your Ring camera connected to WiFi and check the device status in the Ring app. Firmware updates are generally handled through the Ring system.