At times, setting Wavlink routers can be a little bit challenging to do, but with some fast steps, the problem can be solved pretty fast.

Before anything else, make sure that your router is turned on and that the modem is connected to it. Check to see if all the cables are tightly plugged in. Should you have issues accessing the router's admin page, try to directly connect your device to the router with an Ethernet cable instead of using Wi-Fi.

Check if you are entering the correct address; the default is usually 192.168.10.1, or you can try http://192.168.10.1. When your login page doesn't show up, clear your browser cache or try another browser.

Or the login credentials might have been lost. In this case, use a pin to reset the router by holding the reset button for about ten seconds. This action will reset the router to factory defaults so you can start afresh with your Wavlink router setup.

Lastly, check for firmware updates from the admin page, the much longer route to working out bugs and improvements in performance.

If these tips are applied, then your Wavlink router setup should now be working like a charm.